PRODUCT SEARCH

Find equipment and information

NEWS & INSIGHTS

Emergency Safety Showers: Plan the Water Supply and Access Route

An emergency safety shower is an installed response facility, not just a shower head and pull rod. Procurement needs to cover the accessible route, delivered water, activation, temperature control and the consequences of discharge. A compliant component can still be ineffective when the installation is obstructed or its supply is inadequate.

Follow the route an exposed worker would take

Place the proposed station on the actual operating layout. Include parked trolleys, opened equipment doors, material staging and any access-controlled doors. The CCOHS emergency-equipment guidance emphasizes accessible placement, identification and appropriate water temperature. Final placement and performance criteria must follow the facility's hazard assessment and applicable requirements.

A body shower and an eyewash address different exposed areas. Where a combination is required, check the use of both outlets together. The lower bowl does not automatically provide the coverage of an eye-and-face wash, and the body shower should not be treated as an eyewash substitute.

Make the water-supply calculation complete

Give the designer the available dynamic supply pressure, other simultaneous demands and the worst seasonal water temperatures. Pipe connection size alone does not establish flow at the outlet. Temperature-control equipment must be selected for the emergency demand and its specified failure behaviour.

The installation also needs a considered discharge path. Locate electrical equipment and slip hazards, and determine how potentially contaminated runoff will be contained or managed. A floor drain is not permission to discharge every chemical to the sewer. Cold outdoor sites and hot exposed pipe runs need different protective measures.

Plan how readiness will be maintained

Allow space for activation, inspection and maintenance without making the station hard to reach. The operating team needs a defined readiness-check procedure, records and responsibility for defects. A fixture that looks clean externally may still have an obstructed outlet or an unsuitable water supply.

During purchasing, request the installation drawing, supply limits, operation instructions and evidence for the offered assembly. Check the delivered arrangement against those documents rather than applying a catalogue approval to an unspecified combination of parts.

Compare a body drench shower with a combined shower and eyewash. Share the site layout with shengtongjh to coordinate the fixture configuration with the project's safety and plumbing design.