Ultrasonic Cleaners
large industrial ultrasonic cleaner distributor
| Internal tank W × D × H (mm) | 600 × 450 × 450 / 1000 × 500 × 400 / 750 × 650 × 500 |
|---|---|
| External W × D × H (mm) | 780 × 550 × 800 / 1180 × 600 × 800 / 930 × 750 × 800 options, respectively |
| Ultrasonic frequency | 25 or 40 kHz, selected for the cleaning task |
| Nominal ultrasonic power | 1–2 kW across the listed tank families; generator matched to transducers |
| Heating / control | 4.8–7.2 kW options; thermostatic control up to 80 °C |
| Tank / frame | Welded stainless tank; 304 or 316L wetted construction selected for the solution |
| Loading / bath care | Suspended basket and lid; optional basket lift, filtration, oil separation and rinse stage |
| Electrical / discharge | 400 V three-phase, 50/60 Hz configuration; drain and overflow connection by tank design |
The listed dimensions and electrical ranges describe selectable configurations. Supply scope and destination-specific electrical requirements are agreed in the quotation.
The equipment package, accessories and documentation can be tailored to your cleaning application and delivery requirements.
Buying a large industrial ultrasonic cleaner through a supply partner should make the equipment definition clearer. shengtongJH works as an industrial equipment sourcing and supply business, connecting the cleaning requirement with a documented configuration and agreed delivery scope.
Define what arrives with the machine
A quotation headed ultrasonic cleaner may cover only the bath and generator. A working installation can also require a basket, lifting arrangement, lid, rinse stage, filtration, hoses and suitable electrical connections. A clear itemised scope prevents these elements from becoming unresolved site purchases.
Separate the factory-assembled equipment from site-supplied services. This makes responsibility for water, drainage, electrical installation and any local exhaust arrangement visible before the machine is dispatched.
Before selection
Translate component geometry, residue and shift pattern into a tank and handling requirement. Include the required condition after drying so that the package is selected for the whole task.
Before shipment
Agree the approved configuration, included accessories and inspection evidence. Confirm transport dimensions, lifting points and the destination's receiving capability.
At handover
Provide an agreed document list covering operation, installation and component identification. Clarify how a technical question or replacement-part request will be handled.
Service terms need their own scope
Remote troubleshooting, replacement parts, commissioning assistance and on-site attendance are different services. Confirm which are included, how responsibility is allocated and which expenses remain outside the supply price. A distribution enquiry does not imply a local service depot or a named manufacturer's authorised dealership.
For electrical compatibility, identify the actual site supply rather than relying on the country name. Heater demand can dominate the connected load, and a plug adapter does not convert a three-phase machine into a single-phase one.
Keep the machine identifiable after delivery
Retain the configuration record, generator identification and basket drawing with the equipment. If a replacement generator or tank is needed later, matching the acoustic assembly is more important than finding a cabinet that looks similar.
For a wider comparison of package boundaries, see large industrial ultrasonic cleaner suppliers. Include the destination, unloading conditions and requested support scope when asking shengtongJH for a quotation.
The equipment package, accessories and documentation can be tailored to your cleaning application and delivery requirements.