Product overview
Industrial Work Gloves
Sandy Nitrile Grip Gloves
| Material | 13-gauge polyester knit with sandy nitrile coating |
|---|---|
| Color | Black/gray with green cuff trim |
| Sizes | S, M, L |
| Packaging | 50 pairs/carton |
| Cleanliness designation | General |
| Test-report status | No product performance report specified |
Select any required cut, chemical, cleanliness or ESD rating using an appropriate test report. Material and appearance alone do not establish a certified rating.
Glove sizing and application requirements can be customized after the required performance is agreed.
A textured nitrile coating covers the working palm and fingers while a knitted polyester liner supports flexibility. This glove is intended for task-specific handling where grip, fit and freedom of movement need to be considered together.
Evaluate grip on the actual part
A sandy coating gives the hand a textured contact surface. Its behavior still depends on whether the component is dry, oily, wet, smooth or rough. Trial the glove with representative parts and the normal handling force, including small fasteners and tool controls.
The knitted back remains different from the coated palm. Do not treat this partially coated construction as a fully sealed liquid or chemical barrier.
Choose fit before increasing thickness
Excess fingertip space makes small parts harder to control; a tight palm can restrict movement. Use palm width as a starting point and check finger length and cuff security in a fitting trial.
Inspect the coating for wear, cuts and embedded debris during use. No certified cut, chemical or cleanroom performance is specified for this listing. Select the required protection level from documented test results when the job presents a defined hazard.
Palm-width sizing guide
| S | Below 85 mm |
|---|---|
| M | 85–90 mm |
| L | 90–100 mm |
Measure across the palm and confirm finger length in a fitting trial. This is a fit guide; selected size availability must match the order.
Glove sizing and application requirements can be customized after the required performance is agreed.