Finger Cots
White Latex Finger Cots
Smooth white latex finger cots provide localized coverage at the fingertips for handling and inspection. The elastic sleeve and rolled opening fit around an individual finger rather than enclosing the whole hand.
| Material / color | Natural rubber latex / white |
|---|---|
| Contact surface | Smooth |
| Sizes / nominal laid-flat L × W | S: 60 × 18 mm; M: 65 × 25 mm; L: 70 × 30 mm |
| Cleanliness options | General grade or custom requirements |
| Documentation options | ESD and cleanliness reports |
| Process areas | Electronics, assembly, semiconductors, LCD panels, optics and precision electronics |
| Packing | 500 g per bag |
Contains natural rubber latex, which may cause allergic reactions. Dimensions are before stretching; the bag quantity is specified by mass rather than a fixed piece count.
A small sleeve with a clearly defined role
White latex finger cots provide coverage where the fingertip is the point of contact. Typical selection trials involve picking, positioning and inspecting small components. Their usefulness depends on keeping uncovered areas of the hand away from the protected surface.
The rolled opening should stay in place as the finger bends. Check fit on the finger that will actually wear the cot: a size that suits the index finger may behave differently on the thumb. Avoid selecting one size solely to simplify stocking if it creates loose tips or excessive tension.
Keep unused stock separate from used contact surfaces
Take only the finger cots needed for the handling step, protect the remaining bag contents and remove contaminated or damaged cots from the work area. A cot should not return to protected product contact after touching an uncontrolled surface without following the site's change procedure.
The nominal dimensions describe an unstretched product; the pack is specified by mass. Agree any piece-count requirement separately, and keep cleanliness or ESD documentation tied to the actual supplied product rather than another cot of a similar appearance.
Product photographs
Material and fit details
Size selection and cleanliness documentation can be arranged to match your parts-handling procedure.