Select a view. Click the large image to open it full size.
Cleanroom Mops
Honeycomb Fabric T-Mop
| Style | T-mop with removable cover |
|---|---|
| Cover material | Honeycomb fabric |
| Nominal size (mm) | 400 × 105 |
| Handle length | 72–120 cm |
| Cover packing | 10 pieces/inner pack; 10 inner packs/bag; 10 bags/carton |
| Cleanliness options | Class 100; Class 1000 — supply grade subject to confirmation |
| Documentation options | RoHS, cleanliness and sterilization reports for the selected supply grade; availability to be confirmed |
| Application sectors | Electronics, food processing, chemical processing, laboratories, semiconductors, pharmaceutical production and biomedical facilities |
Confirm the cover-to-frame fit and the required supply scope: replacement covers, hardware or complete sets. The selected cleaning procedure determines suitability for the room.
Cover size, packing and cleaning-grade requirements can be customized to suit the application.
A replaceable honeycomb fabric cover wraps around the T-shaped mop head and closes with metal snaps. The textured wiping surface and accessible fasteners make this a practical option for routine surface cleaning where cover changes are part of the cleaning procedure.
A textured cover with a positive closure
The honeycomb weave provides a textured contact surface, while the cover folds around the T-head to keep the hard frame behind the fabric. Metal snaps close the opening at the top. This arrangement lets an operator remove a used cover without replacing the handle and head at the same time.
Fit matters as much as fabric selection. A loose cover can rotate around the head and leave folds on the surface; an over-tight cover can put stress on its seams and fasteners. Compare the head profile and the snap positions when matching replacement covers to existing hardware.
What to inspect during a change
- Seat the cover evenly so the working face lies flat.
- Close both snaps and check that the fabric remains between the frame and the surface.
- Replace covers with damaged seams, loose fasteners or a worn wiping face.
Plan cover changes around the cleaning zone
A removable cover is useful when different rooms or work areas need separate cleaning materials. Keep fresh covers protected until needed and collect used covers separately. Changing the textile at a defined boundary helps prevent soil picked up in one area from being carried into the next.
For laboratory and production use, select the cloth grade against the required particle, residue and chemical-compatibility criteria. A cleanroom grade describes the selected supply option; it does not replace the site's cleaning qualification. Sterilization documentation, where required, must correspond to the actual supplied grade and treatment.
Cover size, packing and cleaning-grade requirements can be customized to suit the application.