Product overview
Adhesive Dust Rollers
Handheld Adhesive Dust Roller
| Construction | Replaceable PE adhesive rolls with handheld frame |
|---|---|
| Colors | White or blue rolls |
| Roll widths | 4, 6, 8, 10 or 12 in; custom sizes |
| Peel-off sections | 100 sections/roll |
| Tack | High tack |
| Listed adhesion | 300–1000 g/25 mm; test method unspecified |
| Packaging | 30 rolls/carton |
| Cleanliness designation | General |
Confirm core-to-frame fit, roll width and surface compatibility. Frame and handle selection should be stated with the order.
Roll width, core fit and handle arrangement can be customized for the cleaning task.
The handheld roller brings a peel-off adhesive surface to benches, panels and other compatible workpieces. The angled frame keeps the handle clear of the rolling contact area for controlled manual passes.
Clean in controlled passes
Start with a fresh section and roll gently across the target area. Overlapping passes help cover the surface without repeatedly scrubbing one spot. If the roll stops turning freely, inspect the frame and core instead of applying more pressure.
A loaded adhesive section can redistribute particles. Remove it at the perforation, contain the dirty face and expose the next clean layer before continuing.
Check the contact material
Evaluate tack, residue and surface marking on a sample of the actual component. Soft coatings, labels and delicate films need particular attention. Choose a roll width that can remain flat on the workpiece without contacting nearby fixtures.
Replace the refill when consumed and keep the handle and frame on the clean side of the workstation. The gallery also shows refill installation and handle formats so that the required assembly can be specified clearly.
Roll width, core fit and handle arrangement can be customized for the cleaning task.