Product overview
Sticky Mats
Multicolor Sticky Mats
| Material | Adhesive-coated polyethylene (PE) film |
|---|---|
| Colors | White, blue, yellow, green, dark blue, gray, pink; confirm selected color |
| Tack | High tack |
| Maximum width | 1.5 m; custom footprint |
| Layer count | 30 sheets/pad |
| Packaging | 10 pads/box |
| Listed thickness | 0.88–1.5 mm; layer/assembly basis to be confirmed |
| Listed adhesion | 300–1000 g/25 mm; test method to be agreed |
| Cleanliness designation | General |
Confirm thickness basis, adhesion test conditions and floor compatibility for the selected mat. Color alone does not indicate anti-static performance.
Mat dimensions, color and adhesive requirements can be customized for the entrance.
Colored sticky mats combine a peel-off collection surface with a visible cue for entrances or work zones. The color scheme can follow the site's own route, department or replacement-control system.
Make the color system useful
Assign each selected color a clear operational meaning and communicate it at the issue point. A different color does not establish a different adhesive strength or cleanliness classification. Keep the approved material and adhesion requirement consistent when reordering.
Choose the footprint around traffic direction and wheel spacing. If people step around a mat or a trolley only touches its edge, increasing tack will not solve the missed contact.
Control lifting, loading and replacement
Apply the backing to a prepared, compatible floor and inspect edges after initial use. Turning wheels can stress the mat differently from straight foot traffic. Remove each dirty sheet with a controlled peel, containing collected dirt inside the folded layer.
Review replacement frequency during busy periods and after changes to material routes. The gallery shows color and size presentations; confirm the exact color, footprint and adhesive requirement for the order.
Mat dimensions, color and adhesive requirements can be customized for the entrance.