Fine pointed microfiber contact
Fabric Swab 076BPSTD
| Model | 076BPSTD |
|---|---|
| Head material | Microfiber |
| Head width × length | 3.2 × 10 mm |
| Overall length | 76 mm |
| Handle | PP; 2.5 mm wide |
| Handle colours | Blue / green / other options |
| Packing | 100 per inner pack; 500 per bag; 50 bags per carton |
Dimensions are nominal. Confirm the supplied configuration for close-fitting applications.
Contact shengtongjh for configuration and packing options suited to your cleaning process.
076BPSTD brings a pointed microfiber head to small-area cleaning. The tapered end allows access beside close features, while the PP handle keeps the operator's hand away from the working surface.
Fine contact without aggressive rubbing
The microfiber surface provides the working interface while the point defines where contact begins. Use that geometry to reach a local edge, not to increase pressure on a stubborn spot. Abrasive particles trapped between any swab and a surface can cause damage even when the head itself feels soft.
Separate loose particles from adherent residue
Inspect the area before wiping. Follow the component's approved method for removing loose abrasive material, then address the remaining residue with a fresh swab and compatible fluid where required. Dragging visible grit across a coating is a different task from removing a thin film.
Move the head along the accessible feature with a short stroke and lift it away. Repeatedly scrubbing the same point with a loaded head can spread contamination or wear the fabric. Replace the swab when its contact face changes condition.
Is a pointed tip suitable for every narrow gap?
No. The entry may admit the point while gripping the wider section behind it. Check the entire path and withdrawal clearance. Use the head dimensions and a representative part to confirm access before adopting the swab for a repetitive operation.
Product images and details
Contact shengtongjh for configuration and packing options suited to your cleaning process.